NEC Diagnostic Software
Copyright (c) NEC Corporation 2001-2016. All rights reserved.
%DIAG-INFO: Starting System POST(Power On Self Test)
DRAM TEST 1: Pass
DRAM TEST 2: Pass
NVRAM TEST: Pass
CPU TEST: Pass
PLD TEST: Pass
GE0 TEST: Pass
GE1 TEST: Pass
GE2(SW-HUB)1-8 TEST: Pass
BRI TEST: Pass
USB TEST: Pass
1.0 VOLTAGE STATUS: 0.987V Pass
1.5 VOLTAGE STATUS: 1.481V Pass
2.5 VOLTAGE STATUS: 2.457V Pass
3.3 VOLTAGE STATUS: 3.234V Pass
5.0 VOLTAGE STATUS: 4.940V Pass
TEMPERATURE STATUS: +27.0degC Pass
NEC Bootstrap Software
Copyright (c) NEC Corporation 2001-2016. All rights reserved.
%BOOT-INFO: Trying flash load, exec-image [ix2215-ms-9.4.17.ldc].
Loading: ######################################################################################### [OK]
Starting at 0x20000
Loading configuration file: startup-configuration.
Configuring router subsystems (before IDB proc): done.
Constructing IDB(Interface Database): done.
Configuring router subsystems (after IDB proc): done.
Initializing router subsystems: done.
Starting router subsystems: done.
All router subsystems coming up.
NEC Portable Internetwork Core Operating System Software
Copyright Notices:
Copyright (c) NEC Corporation 2001-2016. All rights reserved.
Copyright (c) 1985-1998 OpenROUTE Networks, Inc.
Copyright (c) 1984-1987, 1989 J. Noel Chiappa.
Router# sh ver
NEC Portable Internetwork Core Operating System Software
IX Series IX2215 (magellan-sec) Software, Version 9.4.17, RELEASE SOFTWARE
Compiled Nov 14-Mon-2016 17:28:06 JST #2 by sw-build, coregen-9.4(17)
ROM: System Bootstrap, Version 10.2
System Diagnostic, Version 10.2
Initialization Program, Version 8.1
System uptime is 0 minute
System woke up by reload, caused by power-on
System started at Apr 01-Sat-2017 16:40:25 JST
System image file is "ix2215-ms-9.4.17.ldc"
Processor board ID <0>
IX2215 (P1010E) processor with 262144K bytes of memory.
3 GigaEthernet/IEEE 802.3 interfaces
1 ISDN Basic Rate interface
1 USB interface
1024K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Current configuration is based on "startup-configuration"
Router#
Router#
Router#
Router# svintr-config
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# sh run
! NEC Portable Internetwork Core Operating System Software
! IX Series IX2215 (magellan-sec) Software, Version 9.4.17, RELEASE SOFTWARE
! Compiled Nov 14-Mon-2016 17:28:06 JST #2
! Current time Apr 01-Sat-2017 16:41:18 JST
!
!
timezone +09 00
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
device GigaEthernet0
!
device GigaEthernet1
!
device GigaEthernet2
!
device BRI0
isdn switch-type hsd128k
!
device USB0
shutdown
!
interface GigaEthernet0.0
no ip address
shutdown
!
interface GigaEthernet1.0
no ip address
shutdown
!
interface GigaEthernet2.0
no ip address
shutdown
!
interface BRI0.0
encapsulation ppp
no auto-connect
no ip address
shutdown
!
interface USB-Serial0.0
encapsulation ppp
no auto-connect
no ip address
shutdown
!
interface Loopback0.0
no ip address
!
interface Null0.0
no ip address
Router(config)#